This help article explains the steps that need to be taken to map IP addresses for client devices.

LAN client

  1. Log into

  2. Go to Configuration, Network.

  1. Select the network you are configuring under Select Network

  2. Select the Edit button on the far right for the VLAN policy.

  3. Under the field DHCP Settings, Mappings, enter the IP address  you wish to reserve and the MAC ID of the LAN connected client device.

  1. Select the Update button at the bottom of the page.

  2. Wait for 4-5 minutes for the router to reconfigure and reboot.

  3. Configure the client device’s Ethernet port with the Static IP address.

Wifi clients 

  1. Select the edit button for the SSID policy.

  2. Locate the field Mode, and select Router

  3. Locate the DHCP Settings

  4. Follow the same steps outlined above.

  5. Configure the client device’s Wifi with the Static IP address.